Thursday, 31 January 2013

How to Convert FAT /Fat32 to NTFS for Security

Convert File System, fat - fat32 to ntfs Open a dos prompt and give the command c:\convert d: /fs:ntfs this command would convert your d: drive to ntfs. if the system cannot lock the drive, you will be prompted to convert it during next reboot. Normally you should select yes. Conversion from fat/fat32 to ntfs is non-destructive, your data on the drive will NOT be lost.
Be aware that converting to ntfs will make that partition of your drive unreadable under dos unless you have ntfs utilites to do so.
WHY NTFS??
Features Of NTFS File System, that makes it Secure
1. BASED ON BINARY SEARCH TECHNOLOGY.
2. SUPPORTS WIN – 2K , WIN – 2K3 AND WINDOWS XP O/S.
3. FILE AND FOLDER IMP SECURITY IS AVAILABLE.
4. DISK COMPRESSION.
5. SUPPORTS DISK QUOTA.
6. SUPPORTS EFS ( ENCRYPTED FILE SYSTEM )

Wednesday, 30 January 2013

How to Make a Autorun File For your CD and DVD

Did You Notice, whenever You Insert any game 0r software CD, or simply consider Windows Xp Operating system cd. As soon as You Insert the disk in CD/ DVD-ROM, It automatically runs
the cd. If you want to make a autorun file for that CD/ DVD you are ready to burn just read this...
 
1) You open notepad
2) now you writ: [autorun]
 
OPEN=INSTALL\Setup_filename.EXE
ICON=INSTALL\Setup_filename.EXE
 
Now save it but not as a .txt file but as a .inf file. But remember! The "Setup_ filename.EXE" MUST be replaced with the name of the setup file. And you also need to rember that it is not all of the setup files there are called '.exe but some are called '.msi
3) Now burn your CD/ DVD with the autorun .inf file included.
4) Now set the CD/ DVD in you CD/ DVD drive and wait for the autorun to begin or if nothing happens just double-click on the CD/ DVD drive in "This Computer"
 

Tuesday, 29 January 2013

How to disable the display of local or networked derive for privacy and security purpose

If you want to disable the display of local or networked derive for privacy and security purpose, you can follow the following procedure to do so.
To disable the display of local or networked drives when you click My Computer.
1.Go to start->run.Type regedit.Now go to:
HKEY_CURRENT_USER\Software\\Microsoft\Windows\CurrentVersion\Policies\Explorer
Now in the right pane create a new DWORD item and name it NoDrives (it is case sensitive). Now modify it's value and set it to 3FFFFFF (Hexadecimal) . Now restart your computer. So, now when you click on My Computer, no drives will be shown(all gone...). To enable display of drives in My Computer, simply delete this DWORD item that you created.Again restart your computer.You can now see all the drives again.

Huawei Ascend G330 Prices in India

 
Huawei has launched  Huawei Ascend G330 that runs on Android 4.0 (Ice Cream Sandwich) along with Huawei's own HAP 5.1 Android interface. The other features of Ascend G330 include a 1GHz dual-core processor, 512 MB RAM, 4-inch screen, 4GB of internal storage,  5-megapixel rear camera with flash and a 1,500 mAh battery. This smartphone also comes pre-loaded enterprise apps such as Word, Excel, Powerpoint and PDF.
 
 
The price of Huawei Ascend G330is Rs.11,490.
 
Huawei Ascend G330 key Features:
 
4-inch ( 800×480 pixels) IPS capactive touch screen display
1GHz dual-core Qualcomm Snapdragon MSM8225 processor
512MB RAM
5-megapixel auto focus camera with LED Flash
VGA front-facing camera
3.5mm audio jack, FM Radio
3G (HSPA 14.4Mbps, Upload 5.76Mbps), WiFi 802.11 b/g/n, Bluetooth V2.1 + EDR, GPS / A- GPS.
4GB internal storage (2.4GB user accessible), 32GB expandable memory
1,500mAh battery
Android 4.0

Huawei Ascend G600 Prices in India

Huawei has launched Huawei Ascend G600. The phone sports a 4.5-inch LCD IPS QHD display and Corning Gorilla glass. It is powered by a 1.2GHz dual-core processor accompanied by 768MB RAM and runs on Android 4.0.
There is an 8-mega pixel BSI auto focus (AF) rear camera and a VGA one in the front. There is 4GB of internal storage that can be expandable up to 32GB via a microSD card. Huawei Ascend G600 comes with a powerful 1,930 mAh battery, which the company claims can deliver 15 days of standby time.  Connectivity options include Wi-Fi Direct, Bluetooth and DLNA.

The price of Huawei Ascend G600 is Rs.14,990.
 
Huawei Ascend G600 key Features:
    
    4.5-inch inch display with qHD (960 x 540) resolution
    1.2GHz dual-core processor
    768MB of RAM
    4GB of Internal Storage and can be expanded to up to 32GB
    8-megapixel camera
    VGA front camera
    1,930 mAh
    Android 4.0 

HTC Butterfly prices in India

 
HTC has launched HTC Butterfly in India. The phone flaunts a 5-inch Super LCD 3 1920x1080p display with Corning Gorilla Glass 2 and a pixel density of 441 pixels-per-inch. This is the first full-HD smartphone to debut in India.
Some other key features of the HTC Butterfly include 1.5GHz Qualcomm S4 Pro quad-core processor along with 2GB RAM. The phone has 16GB of internal storage, which is expandable up to 32GB. The mobile runs on Android 4.1 (Jelly Bean) and comes with a layer of HTC Sense 4+. The phone comes with an 8-megapixel rear and 2-megapixel front cameras. HTC Butterfly has a powerful 2,020mAh battery. The phone has some good connectivity options which include HDMI out, Micro-USB, Infrared, Wi-Fi, Bluetooth 4.0, and NFC. The smartphone will be available in the market later this month.
 
The Price of HTC Butterfly in India is Rs. 45,990.
 
Key Features of HTC Butterfly
 
    5-inch Super LCD 3 1920x1080p display with Corning Gorilla Glass 2 (441 ppi)
    1.5GHz Qualcomm S4 Pro quad-core processor
    2GB RAM
    16GB internal storage (expandable by another 32GB)
    8-megapixel rear camera
    2-megapixel front camera
    Android 4.1 (Jelly Bean) with HTC Sense 4+
    2, 020mAh battery
    HDMI out, Micro-USB, Infrared
    Wi-Fi, Bluetooth 4.0, NFC
    143 x 70.5 x 9.08 mm
    140 grams with battery

Monday, 28 January 2013

How to Lock Your Computer & Drives

If you use your computer in an area where others may have access to it, and there are things on your system you would rather have kept confidential, locking your desktop when you leave the computer is an essential task. Here's a recipe for a desktop shortcut that will lock your computer in two easy clicks:
Right click on an empty area of the desktop and choose 'new' then 'shortcut.' The create shortcut wizard will open; in the first text box, type '%windir% \System32\rundll32.exe user32.dll,LockWorkStation' and then give your shortcut an appropriate name on the next page, and hit 'finish.' You will notice that the shortcut you created has a blank icon. To select a more appropriate one, right click on the shortcut and hit 'properties.' In the 'shortcut' tab, click the 'change icon' button. In the 'look for icons in this file' box, type '%SystemRoot% \system32\SHELL32.dll' then click 'ok' to see a range of icons for your new shortcut. Choose an appropriate icon. Your desktop locking shortcut is now ready for use. Test it out.
 
Note:
It is useful if u have an account as it will prompt for a password.
OR
Hide all drives in my computer Wanna how your geekiness. Here's the registry hack to hide all the drives in my computer. head up to HKEY_CURRENT_USER\Software \Microsoft\Windows \CurrentVersion\Policies\Explorer create a new DWORD value as NoDrives and modify its data to 03FFFFFF(six F's) reboot and you are done. To change back. delete the key or modify the data to 0. (zero)

Sunday, 27 January 2013

How to Create Hidden User Account in XP

For our own privacy purpose or say it for security we can maintain and create a hidden user account under windows XP operating system. This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view.
To log on using the account it's necessary to use the log on to Windows dialog box similar to the one in Windows 2000.
 
#[Start] [Run] [Regedit]
#Registry Key: HKEY_LOCAL_ MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ Winlogon\SpecialAccounts\UserList
#Modify/Create the Value Data Type(s) and Value Name(s) as detailed below.
#Data Type: REG_DWORD [Dword Value] // Value Name: Type Name of Account to be Hidden
#Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
#Exit Registry and Reboot... While the account is hidden on the Welcome screen, note that the account profile will be visible in C: \Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.

Saturday, 26 January 2013

Micromax Smarty A65 4.3 Price in India

 
Micromax has launched Micromax Smarty 4.3 A65 in India recently.The phone runs on Android Gingerbread, has a 1GHz single-core processor and comes with a memory capacity of 512MB RAM, 190MB user memory, and 4GB ROM.
The device is equipped with a 2-megapixel back camera with flash, and a 0.3-megapixel front-facing camera which allows for video chatting.
Micromax says that the 1,350mAh battery offers 5 hours of talktime, and 200 hours of standby time.
The Smarty 4.3 device to be the first Android smartphone from Micromax that runs on Spreadtrum’s chipset after the company invested $10 million in Micromax last year.
 
The Price of Micromax Smarty A65 4.3 is Rs 4,999.
 
Micromax Smarty A65 4.3 Key Features
  •     Processor: 1GHz single-core
  •     OS: Android Gingerbread 2.3.5
  •     Memory: 512MB RAM, 190MB user memory, 4GB ROM
  •     Dimensions: 69.7x130x10.95 mm
  •     Display: 262K colors, 4.3-inch 480×800 pixels
  •     Camera: 2-megapixel with flash, no auto-focus; 0.3-megapixel front-facing camera
  •     Battery: 1,350mAh; 5 hours of talktime, 200 hours of standby time

Micromax A54 Smarty 3.5 Price in India

 
Micromax recently launched android smartphone Micromax A54 Smarty 3.5. Micromax A54 Smarty 3.5 runs on Android v 2.3.5 Gingerbread OS. It is powered by single core 1 GHz processor from Qualcomm, 3.5” HVGA capacitive touch screen having the resolution of 480×320 pixels, and 3 megapixels camera. The phone has powerful battery backup of 1300 mAh which can last for 170 hours on standby and 4 hours talk time.

Micromax is ranked 12th recently in the world for handset manufacturing. The company has already announced to launch as many as 30 new models of mobile phones in 2013. Micromax A54 Smarty 3.5 is the new offering by the company in the Smartphone mobile market.
 
The price of the Phone in India is Rs 4,659.
 
The key features of the phone are as follows:

•  Dual SIM standby ( GSM +  GSM)
• Entertainment features include audio player, video player, and stereo FM radio.
• Connectivity options include Bluetooth v2.1, Wi-Fi 802.11 b/g/n connectivity, and  micro USB v2.0
•  A 3 mp camera with LED flash and video recording feature
•  G-Sensor and Proximity sensors
• The Phone has 256 MB RAM and 512 MB Rom and Internal Memory of 130 MB that can be expanded up to 32 GB.
• Quick access to popular apps like Facebook, Hookup, Mi Zone, Mi Store, Google Play Store, IM, and GTalk.
 

Most used Ping options and their functions

 Example . . In DOS .. c:>ping 192.168.0.1 –t

-t Ping the specifed host until interrupted
-a Resolve addresses to hostnames
-n count Number of echo requests to send
-l size Send buffer size
-f Set Don't Fragment flag in packet
-i TTL Time To Live
-v TOS Type Of Service
-r count Record route for count hops
-s count Timestamp for count hops
-j host-list Loose source route along host-list
-k host-list Strict source route along host-list
-w timeout Timeout in milliseconds to wait for each reply

Experiment to see how helpful these can be!

Friday, 25 January 2013

How to Join Video Files using Command Prompt

In this post, how to join video of various formats like Mpeg, dat, mpg.. If you have questions like
 
1. How to join various video files into one?
2. Join two video files?
3. How to Join videos taken from mobile phone?
 
Then, the best method to follow is shown below. You can join your video files using just the windows Command Prompt. No need of any video joining software’s.
 
STEPS
 
Step 1:
 For example if you have 3 videos in your hardrive root drive: video1.mpg, video2.mpg and video3.mpg just rename them to a, b, and c (just the letter withoug the file extension). Example:
ren video1.mpg a
ren video2.mpg b
ren video3.mpg c
 
Step 2:
 Open Command Prompt. Start–>Run–>type “cmd”.

Step 3:
Type the location of the drive like d: or C:
 
Step 4:
Type: Copy /b a + b + c videoname.mpg and click enter
 
Step 5:
Now wait till you see: 1 files copied. And type exit and press enter. That’s it.You are done!
 
Note:
If you want to join two files then those files must have the same extension..
 

Lava Xolo X500 Prices in India and Key Features

 
Lava has launched Xolo X500 mobile in Indian market. This smartphone comes with the Atom Lexington Z2420 chip. This is the same chipset that Intel had showcased at the recently concluded Consumer Electronics Show. Lava Xolo X500 is a dual-SIM smartphone, which runs on Android 4.0 (Ice Cream Sandwich). It sports a 3.5-inch screen with a resolution of 480X320. The processor clocks a speed of 1.2GHz and comes with Intel Hyper-Threading Technology. The device packs in 512MB RAM, 4GB of internal storage that can be expanded up to 32GB via microSD card. It has a 1,500mAh battery.
The Xolo X500 comes with a 5-megapixel auto focus rear camera that can click seven images in the burst mode at 6 fps (frames per second). Lava has already shipped the first lot of the assignment and it's executed to arrive in the markets shortly for a best buy price of Rs. 8,999.
 
Price of the XOLO X500 is Rs. 8,999.
 
The key features of the XOLO X500 are -
 
    3.5 inch screen (480×320 in X500′s case)
    Intel 1.2 GHz single core processor with Hyper Threading(2 logical cores)
    PowerVR SGX 540 Graphics co processor
    512 MB of RAM
    5 megapixel camera with 1080p full HD recording(?)
    7 fps burst rate for the camera
    4 GB of internal storage

Thursday, 24 January 2013

How to block a website address from opening in windows

This trick will be helpful for those who want to block access to particular websites on their system. Parents can block certain websites from their younger ones. It can also be used in schools and colleges etc…. Well this trick is very simple and it goes this way.
 
1. Open MyComputer
2. Browse C: (or your Operating system drive)
3. Browse Windows –>System32– >drivers–>etc so the Location will be C:\WINDOWS \system32\drivers\etc In the etc folder look for the file hosts
4. Open this file hosts with notepad.
5. Locate the line 127.0.0.1 localhost
6. To block www.google.com for example, just add this text under
127.0.0.1 localhost:
127.0.0.1 www.google.com
127.0.0.1 www.yahoo.com
7. Save the file. In this way add any number of sites you want, however you will need to prefix it with “127.0.0.1″.
 
Note:
This blocks the website from opening in any browser whether it is Mozilla Firefox or Internet Explorer.

Wednesday, 23 January 2013

How to to speed up your hard disk read and write speed

To speed up your hard disk speed means, its read and write speed. For this we need to configure a special buffer in the computer’s memory in order to enable it to better deal with interrupts made from the disk. This tip is only recommended if you have 256MB RAM or higher. 

Follow these steps:
 
1. Open Run Command –> Start – >RUN
2. Type SYSEDIT.EXE This will open system editor window Expand the system.ini file window. Scroll down almost to the end of the file till you find a line called [386enh]. Press Enter to make one blank line, and in that line type Irq14=4096
Note:
This line IS CASE SENSITIVE! Click on the File menu, then choose Save. Close SYSEDIT and reboot your computer Done. Speed improvement will be noticed after the computer reboots.
Extra Points:
The most speed improvement is visible with IDE drives; however there are reports that this tweak also does good for SCSI disks. In any case, it won’t harm your system, so don’t worry to try it.

Tuesday, 22 January 2013

10 Computer tips to bring computer to normal state when it freezes or hangs up

Sometimes when you are in the middle of someting and suddenly your computer hangs or freezes. You are left with no other option than to restart your computer directly. But the only problem is, you have not saved your work! Don’t panic! There is a solution for that! And you can surely save your file! Here’s how: First keep on pressing “Num Lock” key until your Operating system is back to normal state. This releases the processor from any busy process. If this doesn’t work then follow the below ten tips to bring you computer back to normal state when it is struck.
 
1. Click on “ctrl-alt-delete” keys. The windows task manager will then open, click on all programs that you don’t need and end the task. You will see that all programs on your taskbar will close one by one. If this will resolve the issue! – then save!
(tip# 1:
 if you’re working on an MS Office application, it will automatically save your file in case the programs suddenly shut down —
tip# 2:
always save your file at least every 2 minutes by just simply clicking on the “diskette icon”— its just one click!)
2. If it did not resolve the issue, are there some users logged on that computer? If so, go to switch user (for XP) and log off that user, go back to your log on screen and log on again. The reason the computer hang up is because if there are many open programs and applications, these retains in the memory, if it is too much for the memory to handle, it freezes! Another reason too the computer hang up is because if you are connected to the internet via dial up, and you are running too many applications and opening many websites. So I suggest, if you are multimedia user or a heavy internet user, then you are better off with a higher memory, at least 512Mb of memory. There are simple ways to avoid computer to freeze or hang up:
 
3. Clean your history at least once a week >tools>internet options>clear history. I normally set my history to “0”, meaning, when I restart my computer, it doesn’t save history pages that I have visited
 
4. Delete all internet temporary files >tools>internet options>delete files (do the “offline” content too!)
 
5. Delete cookies (some do not do this, but I do delete cookies at least once a week!) >tools>internet options>delete cookies
 
6. Remove unnecessary programs that you no longer use they are just occupying space and memory! >control panel>add/remove programs
 
7. Do defragmentation at least once a week >point the mouse to “start” button, then right click “explore”>right click the mouse pointing to drive C (which is usually the main system logical drive) >properties>tools>defragment now
 
8. You can also check the logical drive’s volume for errors >point the mouse to “start” button, then right click “explore”>right click the mouse pointing to drive C (I repeat, is usually the main system logical drive) >properties>tools>check now
 
9. It is better to have only one user being logged on. Even if there are many users, make sure the user logs off after using the computer, rather than keeping it logged on and you do the switching of users. Switching users is good as long as you don’t keep all users logged on—I think that is more logical
 
10. Always shut down properly the computer (do NOT use the power button when turning it off!
 

Samsung Galaxy Grand dual-SIM Price in India

 
Samsung has launched today Samsung Galaxy Grand  dual-SIM version smart phone. In the dual-SIM version, Samsung promises total communication flexibility, which allows users to manage two phone numbers from a single phone. It is possible to receive calls on one SIM number while taking a call from the other, ensuring efficient management of personal and work commitments without ever missing a call. The single SIM version is GT-I9080 and should be launched soon.
As part of an introductory offer, Samsung says that the device will come with a Flip Cover in the box and users can download music and movies through ‘My Services’ worth Rs. 8000 for free along with 50GB Dropbox space. Vodafone users also get 2GB data download free per month for two months.
 
Price of the Samsung Galaxy Grand is 21, 500
 
Key features of the device are:
• The smartphone has a 5-inch screen WVGA TFT LCD screen.
• It has an 8 megapixel rear camera and 2 megapixel front camera.
• It runs Android 4.1.2 aka Jelly Bean.
• It has 1.2 Ghz dual-core processor along with 1GB RAM. The device has 8GB memory space and   supports a MicroSD card and is expandable up to 64GB.

Monday, 21 January 2013

How to always get good quality youtube videos

I am gonna show you a small trick that will do all the wonders, and now you can always get good quality youtube videos .
STEPS
Step1: Click to video that you want to see, the link will display on Address bar.
Example: http://www.youtube.com/watch?v= Ne1l6VNkuLM
Step2: Add &fmt=6 to the end of that string. That address like:
http://www.youtube.com/watch? v=Ne1l6VNkuLM &fmt=6 Optional Step: To get more quality youtube video .Add &fmt=18 to the end of that string, you’ll have the best quality video with direct download link !
Example: http://www.youtube.com/watch? v=Ne1l6VNkuLM &fmt=18
 
Note:
Appending &fmt=6 to the URL delivers a 448×336 resolution version of the video and appending &fmt=18 delivers a even better 480×360 resolution version. Its that simple, now you have learned a secret of hacking Youtube for Good quality videos.

Sunday, 20 January 2013

How to find the IP address of the sender in Yahoo mail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
 
Finding IP address in Yahoo! Mail
 
1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers, * Click on Options on the top-right corner * In the Mail Options page, click on General Preferences * Scroll down to Messages where you have the Headers option * Make sure that Show all headers on incoming messages is selected * Click on the Save button * Go back to the mails and open that mail.
5. You should see similar headers like this:Yahoo! headers : nameLook for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.That is be the IP address of the sender!
6. Track the IP address of the sender
 

Saturday, 19 January 2013

How to find the IP address of the sender in Yahoo mail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
 
Finding IP address in Hotmail
  1. 1. Log into your Hotmail account with your username and password.
  2. 2. Click on the Mail tab on the top.
  3. 3. Open the mail.
  4. 4. If you do not see the headers above the mail message, your headers are not displayed. To
  5. display the headers, * Click on Options on the top-right corner * In the Mail Options page, click on Mail Display Settings * In Message Headers, make sure Advanced option is checked * Click on Ok button * Go back to the mails and open that mail.
  6. 5. If you find a header with X- Originating-IP: followed by an IP address, that is the sender's IP addressHotmail headers : name ,In this case the IP address of the sender is [68.34.60.59]. Jump to step 9.
  7. 6. If you find a header with Received: from followed by a Gmail proxy like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [69.140.7.58]. Jump to step 9.
  8. 7. Or else if you have headers like thisHotmail headers : nameLook for Received: from followed by IP address within square brackets[].In this case, the IP address of the sender is [61.83.145.129] (Spam mail). Jump to step 9.
  9. 8. * If you have multiple Received: from headers, eliminate the ones that have proxy.anyknownserver.com.
  10. 9. Track the IP address of the sender
 

Friday, 18 January 2013

HCL ME Y3 Price in India and Specifications

 
HCL has launched HCL ME Y3 tablet recently . HCL ME Y3 features a 7-inch capacitive multi-touchscreen with a resolution of 1024x600 pixels. There is a 1GHz Cortex A9 processor on-board and it will run on Android 4.0.4 (Ice Cream Sandwich) operating system.
The HCL ME Y3 comes with 2-megapixel rear camera and a 0.3-megapixel one in the front. There is 2GB of RAM and 4GB of internal storage, which can be expanded up to 32GB via microSD card. Connectivity options include, 3G, Wi-Fi and Bluetooth. One can make voice calls from both the SIMs and it also supports FM Radio. It comes with a 3,100mAh battery. So far it is not clear whether the tablet will support 3G data on both the SIM or just one of them.
 
Price of the Tablet in India is Rs. 11,999.
 
HCL ME Y3 main features:
  •     7-inch capacitive multi-touchscreen with a resolution of 1024x600 pixels
  •     1GHz Cortex A9 processor
  •     1GB RAM
  •     4GB internal storage, can be expanded up to 32GB
  •     2-megapixel rear camera
  •     0.3-megapixel front camera
  •     Dual-SIM
  •     3,100mAh
  •     Android 4.0.4 (Ice Cream Sandwich)
  •     225x150x90 mm
 
 

How to find the IP address of the sender in Gmail

When you receive an email, you receive more than just the message. The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
 
Finding IP address in Gmail:
 
1.Log into your Gmail account with your username and password.
2. Open the mail.
3. To display the headers,* Click on More options corresponding to that thread. You should get a bunch of links.* Click on Show original.
4. You should get headers like this:Gmail headers : nameLook for Received: from followed by a few hostnames and an IP address between square brackets. In this case, it is65.119.112.245.That is be the IP address of the sender!
5. Track the IP address of the sender.

Nokia-206 Price and Specifications

 
Nokia-206 was unveiled alongside Asha 205 in November last year. Talking about specs, the handset boasts a 2.4 inch LCD display with 320 x 240 pixel resolution, Series 40 platform, 1.3MP rear camera and has no front camera, 64MB free user memory, a microSD card slot supporting up to 32GB additional storage, GPRS/EDGE, Bluetooth v2.1 with EDR and a 1,110 mAh BL-4U battery offering 20 hours talk time and 680 hours standby.
Other than that, Nokia 206 will also come packed with software features including eBuddy screen notifications, free Nokia Life+ web app, including the Life Skills and Live Healthy services, a comprehensive mobile entertainment package including 40 free EA Games available for download from Nokia Store. Also, Asha 206 has Slam feature - a new service that allows users to transfer media between devices that support Bluetooth without the necessity to pair them.
 
Price of the Phone is Rs. 3,599
 
Nokia 206 main features:

    OS: Series 40
    SIM: dual SIM (GSM+GSM)
    Network: 2G
    3G enabled: NO
    Screen Features
        Screen size: 2.4 inch
        Screen resolution: 320x240 pixel
        Screen quality: LCD
        Screen colors: 65536
    Connectivity Features
        Bluetooth 2.1 + EDR
        GPRS (2G)
        EDGE/EGPRS (2G)
        GSM (2G)
        MicroSD card
        3G: NO
    Camera Features
        Primary camera: 1.3MP
        Camera resolution: 1280x960  pixels
        Camera quality: 4x digital zoom
        Secondary camera: NA
    Browser: Nokia Xpress Browser
    Memory Features
        User memory: 64MB
        Expandable memory: 32GB
        Processor: NA
        RAM: NA
        ROM: NA
    Entertainment Features
        Nokia Music Manager
        Music Player
        Voice recorder
        FM Radio with RDS
        Java games

Thursday, 17 January 2013

Nokia-114 Price and Specifications


Nokia has launched Nokia-114, a budget phone with dual-SIM for Rs 2,549 on Thursday. The handset is aimed at young India as it comes with pre-loaded social networking apps like Facebook and Twitter.
 
Nokia 114 has cloud-accelerated Nokia Xpress browser, which, according to Nokia, gives up to 85 percent more efficient mobile browsing.
 
The phone features Nokia's Easy Swap technology that allows users to switch between SIM cards quickly without having to remove the battery or turn off the phone. The Easy Swap technology can personalise and remember up to five different SIM cards, giving consumers full control over their mobile bills. One can also download games and utility applications on this handset through Nokia Store.
 
Price of the Phone is Rs. 2,549
 
Nokia 114 main features:

• 1.8-inch QVGA display
• 0.3-megapixel rear camera
• Dual-SIM (GSM+GSM)
• 32GB expandable storage
• 1020mAh battery that gives 637 hours standby time and 10 hours talk-time
• 10.0mm x 46.0mm x 14.8mm
• Alphanumeric keypad
• Nokia Stereo Headset WH-102
• 80 grams
• Bluetooth support 2.1
• Radio

13 Most Common Window Error and Steps to Fix Them

Note  -----
some require the assistance of a computer technician and you should NOT try to fix them yourself as they could seriously damage your computer system.
 
Error #1
Error Message: System cannot find specified file
Solution: You should reinstall NCP & DUN
 
Error #2
Error Message: Access Denied
Solution:
1. Ensure that you have entered the right username and password in the field labeled domain for NT/2k .
2. Check the option and accept any authentication including clear text is activated.
 
Error #3
Error Message: Invalid Procedure Call
Solution: Dialup and Network components must be installed again
 
Error #4
Error Message: Stack Overflow
Solution:
1. Try cold booting your computer.
2. If this does not work, the problem might come from your RAM or the Swap file.
 
Error #5
Error Message: The system cannot find the specified device
Solution:
1. Ensure that the right modem has been selected.
2. If it does not respond, try to reinstall it.
3. You can also try to reinstall NCP/ DUN/RAS.
 
Error #6
Error Message: No more connections is allowed
Solution:
1. Someone else might have connected under your account.
2. If you have been ghosted on the server, your Internet Service Provider can bump the ghost program off.
 
Error #7
Error Message: Invalid Proper Value
Solution:
1. Autodial should be pointed to the correct dialer.
2. Else, set up the dialer again.
 
Error #8
Error Message: An operation is pending
Solution:
1. You should first try to reboot your computer.
2. Ensure that no other program is using your modem.
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.
4. Make sure that your computer is Spyware free.

Error #9
Error Message: The port handle is invalid
Solution:
1. Select the modem’s COM port and under the Diagnosis section, open “More Info”. You should reboot your computer if you are able to get Ati# responses. Hence, remove the erroneous init string or enter ATZ as the init.
2. You can also reinstall your modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.
4. Your Dialup Networking should be installed again together with its components
5. Your modem might not be working properly. You should then consult your computer manufacturer.
 
Error #10
Error Message: The port is already open
Solution:
1. Try to reboot your computer
2 . Ensure that no other program is using the modem
3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem
4. Try uninstalling the AOL Adapters in the Network Control panel and reboot your computer. Install your Dialup Adapter again.
5. Remove the erroneous init string or enter ATZ as the init.
6. If you have Quicken 2000, deactivate the Quicken Download Manager.
7. You should maybe install yourmodem again.
8. Make sure that your computer is Spyware free.
 
Error #11
Error Message: Buffer is too small
Solution:
1. Ensure that your port speed is not configured to a low speed
2. In your Port Settings, ensure that FIFO is not set to low.
3. Your Dialup Networking should perhaps be installed again together with its components
4. If you are still having problems, contact your computer manufacturer.
 
 
Error #12
Error Message: Wrong information specified.
Solution:
1. Ensure that the are no outages within your area
2. Try to enter the username and password again
3. Set up the dialer again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem
 
Error #13
Error Message: Cannot set port information.
Solution:
1. Ensure that the are no outages within your area
2. Try to enter the username and password again
3. Set up the dialer again
4. Your Dialup Networking should be installed again together with its components
5. You can also try to reinstall your modem
 

How to set Background Picture for your Drive

Open Notepad .Copy(Ctrl+c) and Paste(Ctrl+V) the Below things in Notepad.
 
[{BE098140-A513-11D0- A3A4-00C04FD706EC}] IconArea_Image =”c:\Your Picture Address Location here.jpg” IconArea_Text= 0x00FFFFFF ok now Save this File as “desktop.ini”.
 
Copy this desktop.ini File to your Drive.
 
Note :
 According to Picture Format Change your Pic Extension as .jpg or . bmp
 

Wednesday, 16 January 2013

Facts to Know About Computer Drivers

Here’s a quick guide that will supply you with all you need to know about computer drivers and keeping them error free.
 
What are device drivers?
Device drivers are software programs that help your operating system communicate with your hardware devices such as the keyboard, printer, web cam, video card, etc. A device driver controls a particular type of hardware device. When you buy a new computer, many device drivers are built into the product. These integrated drivers have the capability to support a variety of hardware devices. However, you will need to install drivers manually for those hardware devices that are released after your operating system.
 
What are common causes of driver errors?
 
Generally, driver errors occur when any of the following conditions hold
true:
a) The required device driver is missing.
b) Your device driver is outdated.
c) Your device driver files are corrupt.
d) Entries related to your device drivers in the registry are missing or invalid.
e) How to fix common driver errors
 
Listed below are steps that allow you to fix most driver errors.
 
Step 1 –
 
Install the missing driver In case the driver error you are receiving is occurring due to a missing driver, install the required driver to fix the issue. You can install a driver either by using the driver CD or DVD that came with the hardware device or by downloading the required driver from its manufacturer’s website.
 
Step 2 –
 
Update your driver If you already have the required driver on your system, then ensure that it is
up to date. There are two ways through which you can update your device drivers. You can either use a driver update tool to automatically download the latest driver updates or install new updates manually. You can read the Driver Finder review here http://www.instant-registry-fixes.org/driver-finder-review/ to understand how driver update programs allow you to update all installed drivers in just a few minutes. In case you want to update your drivers manually, you can either use a built-in utility called the Device Manager or download the new updates directly from the driver manufacturer’s website. Windows 7 and Windows Vista users can perform the following steps to update their drivers via the Device Manager:
 
1. Click the Windows button.
2. Click Control Panel.
3. In the Control Panel window, locate and double-click Device Manager.
4. Double-click the hardware device whose driver is reporting an error.
5. Double-click the faulty device driver.
6. Click the Driver tab.
7. Click the Update Driver button.
8. Select Search automatically for updated driver software.
9. Follow the onscreen instructions to install the new driver.
 
Step 3 –
 
 Scan your computer for infections Update your protective software with the latest malware definitions and run a thorough malware scan on your computer. In case the scan results show the presence of malware, quarantine or delete them immediately by using your protective software.
 
Step 4 –
 
Scan your registry ,If the above steps fail to resolve the error, then chances are that information related to your drivers in the registry is incorrect or missing. To ensure this is not the case, scan your registry by using reliable registry repair software.

10 things to know about Facebook Graph Search

Facebook has launched Graph Search, a new search tool that uses social data to provide you with the best possible answers to your queries. Not sure what this feature will can do for you? Worry not, here's a quick guide to help you familiarize with Facebook Graph Search.
Here's over to 10 things you need to know about Facebook Graph Search.
What is Facebook Graph Search?
Facebook Graph Search is a new social search tool aimed at making it easier for users to find people, photos, places, interests. You can look for people who live in the same city as you or like your favourite cuisine. Similarly, you can ask for reviews of a movie or a restaurant that you are thinking of checking out and lots more with this feature.
All you need to do is to type the specific question in the big search bar on top of a Facebook page. You can even improve queries with 'Refine This Search' box, placed on the side of the search bar.
What can I do with it?
With Facebook Graph Search, you can ask specific questions about your friends, such as 'my friends who like The Beatles' or places your friends 'like'. Not only this, you can be even more specific while asking questions, for example 'my friends in New Delhi, who like trekking'.
Graph Search will dish out the best photos of your friends, based on the most number of likes and comments they get.
How can I join it?
Currently, Facebook Graph Search is in early stage of development and is undergoing beta testing. Moreover, it will initially be available for only a few thousand users in the US. However, you can sign up for Graph Search beta testing at www.facebook.com/graphsearch even if it is not available in your region.

Is it available on mobile or desktop?
As of now, the new search feature by Facebook is not available on mobile devices and is limited to desktops only.

Is it not web search?
No, the difference between Graph Search and web search is that the former harnesses the potential of social data in Facebook's server, while the latter makes uses all the websites on the World Wide Web. Therefore, while you can find a movie review by a prominent critic on a Google or Bing search, you will get to know what your friends think about the movie through Facebook Graph Search.
 In case Graph Search is unable to find suitable answers to your queries, Microsoft Bing will instead provide related web search results.

Will this make all my Facebook data searchable?
No. Facebook CEO Mark Zuckerburg stressed that only the data you share with the world will be included while computing Graph Search results. Therefore, if you have made a certain photograph available to friends of your friends, then they may find it in the result upon making a specific query, even though you are not directly connected. Same goes for pages you have liked, places you were tagged at and movies you saw, events you went to etc.
However, Facebook will not take into account status updates while computing Graph Search results.

What about my Instagram photos?
Even though Facebook owns Instagram, it has decided not to include photos posted via the mobile photo sharing app in its Graph Search results.

Who all can search for me?
Anyone on Facebook you have not blocked will be able to see data if it crops up in Graph Search results. However, you can still enjoy privacy by restricting data like photos, friend list, personal details etc to certain groups, such as friends only.

Graph Search affects my current privacy settings in any way?
No, the Graph Search does not change your current privacy settings in any manner. People can only search for content that has been shared by you.
 
 
What does it mean for online marketers?
Facebook Graph Search will help businesses understand their audiences better. For example, a sports merchandise brand can now accurately find out how many people in any particular region, say Mumbai, like MS Dhoni. Moreover, standalone businesses like restaurants can target the local populace with queries like 'people in Bangalore who like XYZ cuisine'.
 
 

Tuesday, 15 January 2013

50 Most Useful Adobe PhotoshopKeyboard Shortcuts + Tips


Global keyboard shortcuts:


1. You can check all Your preferences pressing CTRL + K and learn more .


2. Press TAB – to show/hide tool panels;


3. Press SHIFT + TAB to show/hide only Your palette;


4. Press F repeatedly to cycle screen modes;


5. Press CTRL + TAB to switch to Your next document;


6. Press CTRL + SHIFT + TAB to switch to Your previous document;


7 . Press CTRL + T to enter free transform mode;


Tip for 7th point:---

You can scale proportionally from center Your transform by pressing and holding ALT + SHIFT, when You are dragging.


8. Press ALT + DELETE to fill the layer with foreground color or SHIFT + DELETE to fill with background color;


Tip for 8th point:---

You can use ALT + BACKSPACE or SHIFT + BACKSPACE to fill non- transparent pixels.


9 . Press X to switch foreground/ background color;


10. Press D to reset foreground/ background color to black/white;


Tip for 10th point:-----

You can use ALT + DELETE shortcut to fill just current selection.


11. If You work in high zoom pressing and holding SPACEBAR comes very handy by giving You hand tool to move small distance.


Also You can use it greatly with the marquee tool (or rectangle, shape tool etc.) – just start dragging on the document, and press SPACEBAR while holding Your mouse and move it to desired place, resize as You want it and repeat circle until You are pleased;


12. When You are working, there are lot of experimenting going on, so very handy becomes undo/redo


shortcuts :
Press CTRL + Z to undo/redo previous activity;


Press CTRL + ALT + Z to undo multiple times;


13. While working with big files, it is very important to save often (every 5-10 min) – press CTRL + S to save Your document;


14. Use this one – press CTRL + ALT + SHIFT + S to bring up ’save for web & devices ‘ dialog;


15. If You often use filters remember this keyboard shortcut, to repeat previous accomplished filter : CTRL + F.


16. To draw precise, symmetrical circle or square or straight line press and hold SHIFT, while drawing it .


17. To temporarily switch to move tool while using another press CTRL + CLICK + hold you mouse.


18. Open FILL dialogue by pressing SHIFT + BACKSPACE


19. You can test Your fonts easily by selecting Your text, then selecting “set font family” form and just pressing UP or DOWN buttons.


20. A always hated that I just can’t simply apply my text by pressing ENTER button..that was until I heard about some great keyboard shortcut! So how to approve and escape text editing mode? – easy. Just press Your numeric ENTER or CTRL + ENTER


21. Increase/decrease brush size pressing [ or ] – (left bracket or right
bracket) Toolbar


22. Use Your toolbar shortcuts to switch between tools faster! Memorize shortcuts of tools You use the most.


You can easily see keyboard shortcut by mouseover on certain tool : Use Your Zoom tool wisely!


23. Double click on zoom tool to zoom Your document 100% size;


Tip:

You can press CTRL + ALT + 0 to get actual pixels too (100 % size)!

24. Use keyboard shortcuts to zoom in/zoom out Your document: Zoom in – CTRL + + Zoom out – CTRL + -
or
use Your mouse scroll wheel to zoom in/zoom out – ALT + SCROLL WHEEL UP/ALT + SCROLL WHEEL DOWN



25. To temporarily switch to zoom tool, while using another press:
Quick zoom in: CTRL + SPACE + CLICK
Quick zoom out: ALT + SPACE + CLICK


26. Use keyboard shortcuts CTRL + 0 to set Your image fit to window;


27. Press CTRL + W to close just Your current open document; Palette


Note :
check out Your palette keyboard shortcuts pressing ALT + W


28. Layers menu


Note:

 press F7 to show/hide Your layers menu.


29. Press CTRL + SHIFT + N to create new layer with dialog box;


30. Press CTRL + SHIFT + ALT + N to create new layer without opening dialog box;


31. Press CTRL + ALT + J to duplicate active layer with dialog box;


32. Press CTRL + J to duplicate active layer without opening dialog box ;
33. How to navigate between layers: Mouse click on active layer and press SHIFT to select several layers: Press and hold CONTROL to select or deselect definite layers;


34. Press CTRL+G to group selected layers in one group:


Tip:

 use CTRL + SHIFT + G to ungroup layers


35. Collapse or expand all groups in Your layers palette by pressing CTRL + CLICK on the group’s triangle:


36. Show/ hide Your layers by and holding Your mouse and dragging it up/down. Repeat to do inverse action:


37. To mask layers, do this trick – hold ALT + MOUSEOVER on the line between layers:


38. Click and drag background layer to make duplicate. I suggest to use this action starting every new file:


39. Press ALT + CLICK on icon – to show/hide all layers, except active one:


40. Press CAPSLOCK to show cursor precise/standard mode;


41. Press CTRL + CLICK on layer to make selection:


42. Press CTRL + I to inverse current selection;


43. Press CTRL + D to deselect current selection;


44. You maybe knew about deselect shortcut, but did You know how to reselect previous selection? Just press CTRL + SHIFT + D !


45. Press CTRL + E to merge selected layers or press CTRL + SHIFT + E to merge all visible layers into one;


46. If You ever wanted to make Your text longer or little bit shorter with tracking, You can do it easy with keyboard shortcuts – so first select Your text and then press CTRL + ALT + > or CTRL + ALT + < to set wider or thinner indent .


47. You can easily change Your layer or brush opacity by just pressing number keys - 1 = 10%, 2 =20%, 3 = 30% etc.

How To Create & Edit Layer MasksIn Photoshop

Creating & Editing Layer Masks ,You can obscure an entire layer or layer set , or just a selected part of it, using a layer mask. You can also edit a layer mask to add or subtract from the masked region . A layer mask is a grayscale image, so what you paint in black will be hidden, what you paint in white will show, and what you paint in gray shades will show in various levels of transparency.
To add a mask that shows or hides the entire layer:

1. Choose Select –> Deselect to clear any selection borders in the image.

2. In the Layers palette, select the layer or layer set to which to add a mask.

3. Do one of the following:

a)  To create a mask that reveals the entire layer, click the New Layer Mask button in the Layers    palette, or choose Layer –> Add Layer Mask –>Reveal All .
b)  To create a mask that hides the entire layer, Alt click (Windows) or Option-click (Mac OS) the New Layer Mask button, or choose Layer –> Add Layer Mask –> Hide All To add a mask that shows or hides a selection:

1. In the Layers palette, select the layer or layer set to which to add a mask.
 2. Select the area in the image, and do one of the following:

a) Click the New Layer Mask button in the Layers palette to create a mask that reveals the selection.
b) Choose Layer –> Add Layer Mask –> Reveal Selection or Hide Selection.
To edit a layer mask:
1. Click the layer mask thumbnail in the Layers palette to make it active.
2. Select any of the editing or painting tools.

Note:
 The foreground and background colors default to grayscale values when the mask is active.
3. Do one of the following:
a) To subtract from the mask and reveal the layer , paint the mask with white.

b) To make the layer partially visible, paint the mask with gray.

c)  To add to the mask and hide the layer or layer set , paint the mask with black.
To edit the layer instead of the layer mask, select it by clicking its thumbnail in the Layers palette. The paintbrush icon appears to the left of the thumbnail to indicate that you are editing the layer .
To paste a copied selection into a layer mask, Alt-click (Windows) or Option-click (Mac OS) the layer mask thumbnail in the Layers palette to select and display the mask channel. Choose Edit –> Paste, drag the selection in the image to produce the desired masking effect, and choose Select –> Deselect . Click the layer thumbnail in the Layers palette to deselect the mask channel .

Sunday, 13 January 2013

How to Create Reflection Text with Photoshop

Here is simple tutorial to create realistic look of reflection text in Photoshop in a few easy steps.

STEPS

Step 1

Open Photoshop and create a new document with the sizes set to around 350x 200 and the background should be set to white.

Step 2
Choose the Text tool(T) and write out whatever the text you want to reflect is,

Step 3

Now goto Layers Panel, click on the type layer to highlight it. Now right click on the highlighted layer and click Duplicate Layer or Press Ctrl+J to make duplicate layer.


Step 4
Now go to Edit –> Transform –> Flip Vertical this will make the text upside down, now drag it below the original text so all the letters line up.

Step 5
Select the reflection text layer and goto Layer –> Layer Style –> Blending Option . (Set Opacity as 15% or adjust accordingly)

Step 6

Now select the reflection text layer and goto Layer –> Layer Style –> Gradient Overlay .


Step 7

That’s it we have created reflection text. Carry out the same procedure for creating reflection image Work Fast in Adobe Photoshop